Air-king B600 Manuel d'utilisateur télécharger pdf

IMPORTANT INSTRUCTIONS -

OPERATING MANUAL

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.

PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH

INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions

should always be followed to reduce the risk of ﬁre,

electric shock and injury to person, including the following:

SAVE THESE INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK

AND INJURY TO PERSON, OBSERVE THE FOLLOWING:

a) Use this unit only in the manner intended by the manufacturer.If you

have questions, contact the manufacturer.

b) Before servicing or cleaning the unit, switch power off at

service panel and lock the service disconnecting means to

prevent power from being switched on accidentally. When the

service disconnecting means cannot be locked, securely fasten

a prominent warning device, such as a tag, to the service panel.

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK

AND INJURY TO PERSON, OBSERVE THE FOLLOWING:

a) Installation work and electrical wiring must be done by qualiﬁed

person(s) in accordance with all applicable codes and standards,

including ﬁre-related construction.

b) Sufﬁcient air is needed for proper combustion and exhausting

of gases through the ﬂue (chimney) of fuel burning equipment to

prevent back drafting. Follow the heating equipment manufacturer’s

guideline and safety standards such as those published by the

National Fire Protection Association (NFPA) and the American

Society for Heating, Refrigeration, and Air Conditioning Engineers

(ASHRAE), and the local code authorities.

CAUTION: FOR GENERAL VENTILATING USE ONLY. DO NOT USE

TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS.

c) To avoid motor bearing damage and noisy and/or unbalanced

impellers, keep drywall spray, construction dust, etc. off power unit.

d) Read all instructions before installing or using exhaust fan.

e) Refer to the instructions included with the Range Hood Canopy for

additional safety information.

www.airkinglimited.com

672016 Rev. C 4-10 1 of 8

Profesional Series

Blower

Models: B300, B500, B600

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - OPERATING MANUAL

IMPORTANT INSTRUCTIONS -OPERATING MANUALREAD AND SAVE THESE INSTRUCTIONSREAD CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE

Page 2 - SECTION 3

INSTALLATION INSTRUCTIONSCAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.WARNING: THIS BLOWER IS INTENDED FOR U

Page 3 - SECTION 4

5. Plug both the 3 wire and 4 wire quick connect cords from the blower into the appropriate receptacles located on the inside front of the hood canop

Page 4 - REPLACEMENT PARTS DIAGRAM

www.airkinglimited.com672016 Rev. C 4-10 4 of 8REPLACEMENT PARTS DIAGRAM # Qty. Description Replacement Part # 1 1 Blower Assembly 5S

Page 5 - MODE D’EMPLOI

www.airkinglimited.com672016 Rev. C 4-10 5 of 8INSTRUCTIONS IMPORTANTES – MODE D’EMPLOICONSERVER CES INSTRUCTIONSVentilateur de la série Professionnel

Page 6

www.airkinglimited.com672016 Rev. C 4-10 6 of 8INSTRUCTIONS D’INSTALLATIONAVERTISSEMENT : VOUS ASSURER QUE L’ALIMENTATION EST COUPÉE AU PANNEAU DE SER

Page 7

www.airkinglimited.com672016 Rev. C 4-10 7 of 84. En utilisant 8 des vis #8-32 incluses, les rondelles plates et en étoile, montez le ventilateur en

Page 8 - 672016 Rev. C 4-10 8 of 8

www.airkinglimited.com672016 Rev. C 4-10 8 of 8DIAGRAMME DES PIÈCES DE REMPLACEMENT # de pièce # Qté. Description de remplacement